ac/dc external wallmount adapter universal input single output 20-36 watts switching power supplies tpes25 series features: accommodate universal ac input diverse wallmount ac plugs meet universal safety standards emi meet en55022 /fcc class b ce marking compliance output specification output voltage: see ratings chart. output current: see ratings chart. output wattage: 20-36 watts typical. output connector & cord: optional. line regulation: 0.1% typical. load regulation: 1.5-3% typical. noise & ripple: 1.0% typical peak to peak. ovp: built-in, zener diode clamping. adjustability: factory set. overload protection (olp): fully protected against output overload and short circuit. olp set at about 125-150% rating output wattage. consult the factory for olp setting. specification input specification input voltage: 90-264vac typical. input connector: wallmount format. wm1/ wm2 (usa/japan), wm3(euro-stecker). wm5 (uk) / wm6 (australia). input frequency: 47-63hz. inrush current: 28a @230vac typical. input current: 0.6a @115vac/0.3a @230vac. dielectric withstand: meet iec60950. emi: meet en55022/ fcc class b. hold-up time: 8ms @115vac typical. 35ms @230vac typical. general specification efficiency: 71-85% typical. switching frequency: approximate 70k hz. circuit topology: fixed frequency flyback circuit. transient response: output voltage returns in less than 3ms following a 25% load change. safety standard: meet ul60950/ en60950 class i & ii. power density: 2.67 watts / cubic inch. operating temperature: 0 c to room temperature. storage temperature: -20 to +85c. temperature coefficient: 0.04% /c. cooling: free air convection. construction: impact resistant thermo-plastic enclosure case. wallmount format. note: (1) all measurements are at nominal input, full load, and +25c unless otherwise specified. (2) load regulation is measured at 115vac or 230vac in percentage to indicate the change in output voltage as the load varied f rom half load to full load (%). (3) the exact obtainable load regulation depends upon the output cord selected and load current. upper data are for 6 ft. (2 m) cord awg#18 wires. (4) due to requests in market and advances in tec hnology, specifications subject to change without notice for the details of safety approval, please consult the factory. total power international, inc. toll free: 877-646-0900(us) ph# 978-453-7272 www.total-power.com total power international, inc.
model no. description: tp es25 - x x x yyy - s ac plug type output current output voltage series name ( total power external switcher) about 25w output voltage/current ratings chart defined output voltage output voltage (vdc) / current (a) 3.3vdc any voltage < 24.0vdc 3.3-5.0v/5.0-4.0a, 5.1-6.0v/3.95-3.5a, 6.1-7.4v/3.45-3.0a, 7.5-10.0v/2.98-2.5a, 10.1-15.0v/2.49-2.0a, 15.1-15.7v/1.98-1.91a, 15.8-16.6v/1.89-1.8a, 16.7-17.6v/1.79-1.7a, 17.7- 18.7v/1.69-1.6a, 18.8-20.0v/1.59-1.5a, 20.1-21.4v/1.49- 1.4a, 21.5-23.0v/1.39-1.3a, 23.1-23.9v/1.29-1.25a. 24.0vdc any voltage 36.0vdc 24.0-25.7v/1.5-1.4a, 25.8-27.6v/1.39-1.3a, 27.7-30.0v/1.29-1.2a 30.1-32.7v/1.19-1.1a, 32.8-34.2v/1.09-1.05a, 34.3-34.9v/1.04-1.03a, 35.0-36.0v/1.02-1.0a. note: refer to the upper chart or consult factory for the exact model no. and v/a . single output (model no. for example. ) model no. ac plug o/p voltage o/p current TPES25-033500-1 wm1 3.3vdc 5.00a tpes25-050400-2 wm2 5.0vdc 4.00a tpes25-090270-3 wm3 9.0vdc 2.70a tpes25-120240-5 wm5 12.0vdc 2.40a tpes25-150200-6 wm6 15.0vdc 2.00a tpes25-180166-1 wm1 18.0vdc 1.66a tpes25-230130-2 wm2 23.0vdc 1.30a tpes25-240150-3 wm3 24.0vdc 1.50a tpes25-300120-5 wm5 30.0vdc 1.20a tpes25-360100-6 wm6 36.0vdc 1.00a mechanical dimensions: mm [inches] weight: 240g (8.5oz). [1] wm1,[2] wm2, [3]wm3, [5] wm5, [6] wm6, total power international, inc. toll free: 877-646-0900(us) ph# 978-453-7272 www.total-power.com total power international, inc.
|
